Siwen

Siwen

0-day streak
Today/yesterday I put together the parts for a nvg mount for a modified version of the pvs-69 night vision goggles I'm making. I took the springs from my old nerf gun
https://scrapbook-into-the-redwoods.s3.us-east-1.amazonaws.com/f62e09c5-b095-467d-8da5-fbc3696af359-20241127_230356.jpghttps://scrapbook-into-the-redwoods.s3.us-east-1.amazonaws.com/ad0dcdfa-5682-4277-9993-774a1c4da402-20241127_233652.jpg
Continued work on the 4 port usb, routed all the connections up. I've decided to put a large hole at the top left for a keychain and multiple smaller holes for a mounting a 3d printed case I'll be designing later. I'm debating on if I should expose some of the pcb so I can put Silk screen art on it or lasercut a piece of plexiglass for the case. I also want to get everything on a breadboard so I can test if it actually works. I found out you can get breakout components for smd components and usb ports so I'm definitely going to buy some. :pcb:
https://scrapbook-into-the-redwoods.s3.us-east-1.amazonaws.com/fe264d76-2dd4-4aaa-b4b2-0a6208088716-image.png
Today I researched info about USB-C for PCB design so with the end goal of a USB-C 4 Port Hub and started working on a 4 port version of the USB hub I was working on.
https://scrapbook-into-the-redwoods.s3.us-east-1.amazonaws.com/4087056b-4b4b-4b05-aabd-dbc1e5d4c894-image.png
pcb emoji
c emoji
Today I did: the PCB Hacker Card jam and USB Hub jam
https://scrapbook-into-the-redwoods.s3.us-east-1.amazonaws.com/a85a41bc-0f80-40fa-be09-86b6495fcf39-pcb_hacker_card_edited.pnghttps://scrapbook-into-the-redwoods.s3.us-east-1.amazonaws.com/295708ad-1ffd-4f14-bb1c-bb79a670ddad-image.pnghttps://scrapbook-into-the-redwoods.s3.us-east-1.amazonaws.com/01ab791e-bf13-4ac6-8390-a10055bb998a-image.pnghttps://scrapbook-into-the-redwoods.s3.us-east-1.amazonaws.com/01638911-47da-453e-b2ea-68f9e9f5e72c-image.png