day 10 of #hardware-party and it’s done!! (for the most part 😅) i still have to add the rest of the servos and add a visual refresh to the order page, but here is a video of what i have so far (@OliviaCook i bought some cheetos for it too 🙃)day 9/10 of #hardware-party and today i frantically worked to redesign my adapters because the old ones were too small.
day 8 of #hardware-party AND THE CABINET IS DONE!! now i have to mount the servos 😅
day 7 of #hardware-party and today i finished the ui and mounted the coin acceptor, and the QR scanner camera.
day 6 of #hardware-party and today i continued to work on the iu of the snack machine’s touch screen
day 5 of #hardware-party and today i finished up the adaptors and sent them to the 3d printer.
day 4 of #hardware-party and i worked a little bit on the ui for the snack machines integrated touch screen
day 3 of #hardware-party and today's task was moving the snack machine cabinet from the workshop to outside to start staining! it was a lot heavier than i had thought. 😅
day 2/10 of #hardware-party and today i worked on some 3d designs for parts that i will 3d print later in the week!
day 1/10 of #hardware-party!! today's task was creating a dashboard to control my servo motors for further testing. these motors are what will run the mechanics behind my snack machine.