Mr.E-U04JY225AHK

Mr.E-U04JY225AHK

0-day streak
Day 10: was not able to finish the project but tried to supply more power to heat up the plates Got a bigger temp difference from last time.
https://cloud-cpgo1t2pn-hack-club-bot.vercel.app/0img_2612.jpg
wom emoji
winter-hardware-wonderland emoji
Day 9: In order to try and test whether voltage from a peltier plate could power another plate, I quickly setup this circuit. It seemed to cause a very subtle difference on the lettered side.
https://cloud-hp1ef9kcg-hack-club-bot.vercel.app/0img_2611.jpg
wom emoji
winter-hardware-wonderland emoji
Day 8, tried to make the alpha run on the thermo electric plates but it wouldn't. I guess the alpha needs a lot more heat. Will try to hook up more of eltier plates tomorrow to see if a considerable amount of voltage can be produced.
https://cloud-pc5orh6ix-hack-club-bot.vercel.app/0img_2610.jpg
wom emoji
winter-hardware-wonderland emoji
Day 7: tried to connect the plates in series but was surprised to see that it only produced 0.2 colts. I might have to try more plates next time.
https://cloud-6fypog1do-hack-club-bot.vercel.app/0img_2608.jpghttps://cloud-1u0o85zp5-hack-club-bot.vercel.app/0img_2609.jpg
wom emoji
winter-hardware-wonderland emoji
Day 6 of 10: was not able to do much today but wanted to get a rough estimate on rpm of gamma type engine off of source.since there are 5 spokes, it seems to have 100 rpm but this will increase with the heat increase I hope.
https://cloud-oaxftkgke-hack-club-bot.vercel.app/0img_2607.jpg
wom emoji
winter-hardware-wonderland emoji
Day 5, Couldn't do very much today. I tried to generate electricity from body heat of my hand and got a max of about 0.12 V. It seems like I really need the cooling side to create the heat differential. I will try to build that manifold.
https://cloud-pn04vuc6r-hack-club-bot.vercel.app/0img_2606.jpg
wom emoji
winter-hardware-wonderland emoji
Day 4 of 10: Got to see some exciting and disappointing results with the peltier plates. They work for sure but they did not produce as much voltage as I anticipated. I guess I need to add ice to the other side. But hey! I got 0.5 Volts of electricity produced by a tea candle! Next it is going to be body heat!
https://cloud-p278vn02l-hack-club-bot.vercel.app/0screen_shot_2023-02-17_at_10.11.04_pm.pnghttps://cloud-i2ui4vri0-hack-club-bot.vercel.app/0screen_shot_2023-02-17_at_10.10.55_pm.png
wom emoji
winter-hardware-wonderland emoji
Day 3/10: Finally started to experiment with the thermoelectric plates. They seem to die out after a while, will have to conduct more research on that. But for now, it kind of makes a low temperature gamma stirling engine run a little bit. I maybe using the wrong power source as well.
https://cloud-vmp7nd42y-hack-club-bot.vercel.app/0screen_shot_2023-02-16_at_11.45.12_pm.png
Day 2/10 of #hardware. Got the alpha type engine running. It clocked in around 2000 rpm I believe. It is way faster! Just might have to figure out how to connect motor.
https://cloud-a8jwhsveb-hack-club-bot.vercel.app/0screen_shot_2023-02-15_at_11.56.26_pm.png
Day One: Fixed up the gamma type stirling engine and got it running on hot water. Can't wait to get the alpha type engine running! Its way faster!
https://cloud-onznxy9z0-hack-club-bot.vercel.app/0screen_shot_2023-02-14_at_10.18.31_pm.png