Day 9 of HWH
Check the connection with the remote to make it moveable.
Day 8/10 of WHW
Wiring everything
Day 7/10 of HWH
The escs for the motors were unable to be connected, so changed the connection type.
Day 6/10 of HWH
Received the pinion centering piece and I am ready to make the motors and wheels work.
Day 5/10 of HWH
Testing the motors, but noticed that the gear is off centered so I will buy a motor shaft centering piece. This should center the gear and spin the wheels of the RC.
❄️Day 4/10 of HWH
Mounted the caterpillars onto the frames, as well with the motor.
❄️Day 4/10 of HWH
Printed the wheels needed to spin the track .as well with the body of the RC model
💖3/10 of WHW
Assembled both tracks. Tracks are made from 42 links each and are held together by screws and a lock nut.
💖Day 2/10 of HWH
Created one set of caterpillars. Each batch of caterpillars (24) takes around 18 hours to print. I also got all the parts required to move the RC
❄️Day 1 oh WHW
Made the caterpillars for my allterain rc vehicle. Treads are all 3d printed from PLA
💖🚗Printed the all terrain vehicle caterpillars and assembled them with screws. (for winter wonderland project)
