❄️

Posts tagged with :snowflake:

Kieran
@Kieran7
finaly have a decent amount of snow this winter!
https://scrapbook-into-the-redwoods.s3.amazonaws.com/a72d452e-1dee-4768-808b-a408f194b086-photo_jan_19_2024__2_.jpg
jdogcoder
@jdogcoder0
#vermont Snow day!!!!! ❄️ (for those from warm places, this is when school is called off due to snow and/or ice)
https://scrapbook-into-the-redwoods.s3.amazonaws.com/d205fbb6-7b4d-4fe1-b197-daf34400a88d-img_6794.jpghttps://scrapbook-into-the-redwoods.s3.amazonaws.com/0ecf3fe3-45f1-4365-9ff3-5607d4047fa2-img_6795.jpg
ZeroQL
@ZeroQL0
#w-of-the-day day 97 The cold got worse but after a long grueling day of laying down and doing nothing I’m feeling a tad bit better now I’ve mostly avoided using my phone today (the whole week actually) so I’m really happy for that Parents still think it’s too much xD
https://scrapbook-into-the-redwoods.s3.amazonaws.com/414e10e1-31b5-4a0a-8714-c8c0101a4e5b-image_from_ios.jpg
ZeroQL
@ZeroQL0
#w-of-the-day day 96 caught a cold so i really didn't do anything at all today, sorted through my files and deleted all useless projects and packages (they were a lot), also downloaded windows
https://scrapbook-into-the-redwoods.s3.amazonaws.com/1ddb4cb7-3b80-445c-b38f-dbea94c32924-image.png
Shreeya
@Shreeya0
I have got cold, somebody pray for me ☠️
https://scrapbook-into-the-redwoods.s3.amazonaws.com/f36e365b-d105-4356-b41c-bcf0257e5b70-img_20230401_181230351.jpg
Sean
@Sean1
Snowww! Schools still open tho
https://cloud-cqt5g163l-hack-club-bot.vercel.app/020230309_083729.jpg
Sean
@Sean1
Snow!
https://cloud-gil33cini-hack-club-bot.vercel.app/020230308_145920.jpg
ManasMahendra-U04AT2QQ741
@ManasMahendra-U04AT2QQ7410
Manas day 1 to 10 days update- I'm really sorry about the community . I'm really feeling low due to not having my laptop with me My laptop is under some serious repair situation We are almost ready with circuit and code but it is stuck with my laptop what for now I can share is some circuit picture We are using raspberry pi 4 b+ 8 GB Ram Pico pi for spi interface communication Using my mi 20000mah power bank to power both of them and I m using my cat 8 ethernet wire to control pi with ssh protocol This system is attached to Google fire base
https://cloud-8sh7w00cr-hack-club-bot.vercel.app/0img_20230223_231228.jpghttps://cloud-ifhr2x82g-hack-club-bot.vercel.app/0img_20230223_231231.jpg
HuzaifaAzhar-U04FS7WJLSH
@HuzaifaAzhar-U04FS7WJLSH0
REPLACED!! Replaced the burnt out shield with the new one. Motors seem working fine!
https://cloud-nnwzjzdfk-hack-club-bot.vercel.app/0replaced.jpg
OrbitalDev
@OrbitalDev0
❄️ WHW Day 7/10 Today, I set up recording for the camera! Now, I have 6hr history of the camera. I also got some displays out of old laptops. What should I do with them? 💨 Sprints will be back tomorrow! I also worked on some scholarships today! That's all, folks. Go to bed.
https://cloud-kwyq955i2-hack-club-bot.vercel.app/0img_20230220_235627.jpg
TheScientist101
@TheScientist1010
Day 7 of #hardware-party : I worked on getting tensorflow to work headless today. I am using a virtual x11 display and streaming it using vnc. It was a lot of just learning how to do object detection with tensorflow, and the virtual display was pretty simple. It is a startup script now so that the object detection starts as soon as the pi gets power.
abbanso10
@abbanso100
• day 6/10 for #hardware-party exploring more about the jetsonPack before arriving my parts,
https://cloud-k0qqd8xs6-hack-club-bot.vercel.app/0screenshot_20230220_153427_com.slack.jpg
ShouUrata-U04FHQUHG07
@ShouUrata-U04FHQUHG070
Day 5/10 of HWH Testing the motors, but noticed that the gear is off centered so I will buy a motor shaft centering piece. This should center the gear and spin the wheels of the RC.
https://cloud-rkmje0bom-hack-club-bot.vercel.app/020230220_102053.jpg
OrbitalDev
@OrbitalDev0
❄️ WHW Day 6/10 Today, I made designs for a server rack based from Ikea furnishings (19", 16-18U). I know, I know, it's been done before, but I'm so excited and can't wait to get it all ordered! I also applied for some scholarships today... Fun!
https://cloud-ipa5bn8al-hack-club-bot.vercel.app/0image.png
maggie
@maggie0
:winter-hardware-wonderland: Winter Hardware Wonderland -- Day 6 :winter-hardware-wonderland: more art (and more :bongocat:), now for the front of the pcb
https://cloud-o4m5f505x-hack-club-bot.vercel.app/0image.png
SyrusTolentino-U04J8GACJR3
@SyrusTolentino-U04J8GACJR30
A late day 2: VOICE RECOGNITION IS WORKING!!! My hand warmer worked really well and did great at keeping me warm this relatively cold night. Voice recognition just worked, it's not 100% accurate but mostly accurate to where we need it and FAST
https://cloud-ghyx3tvhq-hack-club-bot.vercel.app/0pxl_20230220_030546991.mp.jpghttps://cloud-ccqbbva9j-hack-club-bot.vercel.app/0pxl_20230220_030036930.jpg
ShouUrata-U04FHQUHG07
@ShouUrata-U04FHQUHG070
Day 4/10 of HWH Mounted the caterpillars onto the frames, as well with the motor.
https://cloud-j172vcott-hack-club-bot.vercel.app/020230219_085852.jpg
zuzu-U04GANRG9TN
@zuzu-U04GANRG9TN0
Day 5 of WHW Today my goal was to do my circuit connection but it wasn’t going as planned because my wires weren’t soldering to my LED strips. I posted a question a couple minutes ago in the hardware-party chat. Im also working on adding a button to control the LED so I watched a couple videos to understand the process. I’m determined to finish the circuit connection by tomorrow so I can move on loll
https://cloud-niytobv52-hack-club-bot.vercel.app/0img_0769.jpg
RebeccaWang
@RebeccaWang0
Day 4 of #hardware-party. I took a detour with playing around with LEDs and resistors. Quite blinding. Thanks @kaidevrim for donating your resistors 🦅
cytronicoder
@cytronicoder0
I promise the sprig gaming controller is coming pls :prayge: Doing some research + planning for my upcoming consumer choice exhibition at my school! My product is ✨ plastic water bottles ✨ and I'm looking at various externalities. I also started designing what my actual board would look like! :roo-yay:
https://cloud-m1oigttuj-hack-club-bot.vercel.app/0screenshot_2023-02-17_at_10.51.11_pm.pnghttps://cloud-1kjzjjvnr-hack-club-bot.vercel.app/0img_5269.jpg
Sean
@Sean1
:winter-hardware-wonderland: Day 4 of Hardware Winter Wonderland? I attached my temperature sensors to screw block terminals so I can more easily secure them. I also emailed pimoroni support about the display that stopped working randomly. and I started working on the receiving end of the UART between my pico's
https://cloud-pyaopq53p-hack-club-bot.vercel.app/0image.png
Processing-U04FR56582F
@Processing-U04FR56582F0
Today I didn't get anything done. I tried to get the magnet hall effect sensor working for three hours and just gave up. I didn't have a 10 kohm resistor so I put together 8 resistors to make about 10 kohms.
https://cloud-mjx7rrd2f-hack-club-bot.vercel.app/020230217_002708.jpg
BoyneGregg-U04AF4NLSJE
@BoyneGregg-U04AF4NLSJE0
Winter Hardware Wonderland - Day 3 We now have display output on the matrix! I also have an extensive system for it.
https://cloud-8fhvhhudg-hack-club-bot.vercel.app/0img_5337.jpg
Sean
@Sean1
:winter-hardware-wonderland: Day 3 Had a somewhat unsucessfull day. Something happened overnight and now the pico driving my display only talks to my computer when the display isn't powered. it was working fine last night, I did get a new desk tho #hardware-party
https://cloud-13edshbyg-hack-club-bot.vercel.app/020230216_130813.jpg
SophiaNolan-U04J8355BJ8
@SophiaNolan-U04J8355BJ80
Day one and two, got so much stuff printed
https://cloud-la0hwtnz8-hack-club-bot.vercel.app/0img_20230215_180053.jpghttps://cloud-rdx0yz020-hack-club-bot.vercel.app/0img_20230215_180026.jpghttps://cloud-bv9l862ft-hack-club-bot.vercel.app/0img_20230215_180042.jpg
ShouUrata-U04FHQUHG07
@ShouUrata-U04FHQUHG070
Day 2/10 of HWH Created one set of caterpillars. Each batch of caterpillars (24) takes around 18 hours to print. I also got all the parts required to move the RC
https://cloud-jehlgno9i-hack-club-bot.vercel.app/020230108_103216.jpg
Andrew
@Andrew0
day 1 of hardware-party started mocking out the web ui to control frequencies of the fm radio module tomorrow I plan to: • setup my system for ESP-32, whatever drivers, deps etc. • finish the web UI designs • start setting up the hardware
https://cloud-doeoocfdp-hack-club-bot.vercel.app/0image.png
kyle
@kyle0
Day one of whw: Marked up the sheet with fold and cut lines for the kayak following the schematic.
https://cloud-5ia415d61-hack-club-bot.vercel.app/020230214_182712__1_.jpg
Aiden
@Aiden0
I’ll be posting everyday at 6:00PM CT to allow for some building time after school, i’m a bit late but i got caught up in bandaid mod, tape mod + laying out switches and keys on my desk!
https://cloud-cr15h5mz7-hack-club-bot.vercel.app/0img_1553.jpg
Peiprjs
@Peiprjs0
Also after 2 months of waiting because of problems with the company that imports it here… delicious german hacker energy cold tea… thing
https://cloud-lkq0g3mb3-hack-club-bot.vercel.app/0img_4350.jpg
Abel-U04GARXJU10
@Abel-U04GARXJU100
Made a block diagram for my Winter Hardware Wonderland entry. Its gonna be a small synth/groovebox you can playaround with for some lofi like tunes. Also its my first scrapbook entry!
https://cloud-5mwacsiiu-hack-club-bot.vercel.app/0untitled_diagram.png
Andrew
@Andrew0
my website now has snow, merry christmas everyone 🎄
sahitid
@sahitid0
https://cloud-o61exqi1p-hack-club-bot.vercel.app/0hackclub.jpeg
sam
@sam0
Tysm to everyone at HQ! Hacky Holidays!! :christmasparrot: Did u accidentally send me two of the photos lol
https://cloud-hr21ymihy-hack-club-bot.vercel.app/0img_1905.jpg
DevIos
@DevIos0
Enjoying the view ❄️ ☃️
https://cloud-nzd9fucze-hack-club-bot.vercel.app/0snapchat-757948525.jpg
KanishqKancharla-U041MC28L3B
@KanishqKancharla-U041MC28L3B0
https://cloud-35j7sqg00-hack-club-bot.vercel.app/0image.png
ryan
@ryan0
added snow to my website for christmas ! and yes, it's christmas now, thanksgiving is basically over...
https://cloud-cbskh102s-hack-club-bot.vercel.app/0image.png
DevIos
@DevIos0
Hii there! Had a awesome hackathon event today, thanks for hackbank for sticker and fund!!, although we had snow and train being cancled we got 40 people to join in our event, side note the 3d print medal looked great psst @toby, here a 3d print of yesterday's model for now as I am tired to get all the hackzthon event , I will post once local news has publish it on there site!
https://cloud-h710hrlj1-hack-club-bot.vercel.app/06907950541.jpghttps://cloud-bj2z84q0g-hack-club-bot.vercel.app/0img-20221122-wa0021.jpghttps://cloud-nor21e252-hack-club-bot.vercel.app/0img-20221122-wa0003.jpeg
DevIos
@DevIos0
Snowwww daaayyyy!!!! , time to fall too many times that I can't count :poggers:
https://cloud-jezxjmjpj-hack-club-bot.vercel.app/020221119_141710.jpghttps://cloud-hsl4g8r91-hack-club-bot.vercel.app/020221119_141704.jpg
DevIos
@DevIos0
Coffee time with God dam cold weather, did custom hoodie order my god 1000$ for just 25 hoodie request , swedish is expensive, other then that done with 3d model of prize which we will 3d print on Monday, peace out :roo-love:
https://cloud-23io395jy-hack-club-bot.vercel.app/020221118_081434.jpg
zrl
@zrl0
Day 6/10 for #10-days-in-public! During this journey, I’m rebuilding zachlatta.com. Unfortunately I came down with a cold today, so it’s another short day for me 😞. I spent a little time in the morning trying to figure out how to make Markdown files in (nested) subfolders work. The GraphQL query fetching the list of files from GitHub’s API needs to be rewritten to accomplish this. Thanks so much for your help this morning on this @caleb!
https://cloud-pqtmhgtn1-hack-club-bot.vercel.app/0screen_shot_2022-10-10_at_6.36.49_pm.pnghttps://cloud-ghjajuxrn-hack-club-bot.vercel.app/0screen_shot_2022-10-10_at_6.36.39_pm.png
neel.redkar
@neel.redkar0
yooo got snow particles and the background goingggg (the background kinda parallaxes)
https://cloud-m9v9pbyor-hack-club-bot.vercel.app/0image.png
karolina
@karolina0
Have you ever sat and thought, "Hmm, I wonder how cold and depressing it is in Seattle right now? How much better off am I?" Introducing... Seattle-ometer! Now, you can compare yourself to Seatteites to your heart's content! Just type in a valid US ZIP code and press submit. Brought to you by a rainy day in Seattle with nothing better to do :) seattle.karolinadubiel.repl.co
https://cloud-al2388dow-hack-club-bot.vercel.app/0image.png
m04
@m040
:maya: (slowly getting better at 3d modelling/animation)
https://cloud-ffytcfxxz-hack-club.vercel.app/0image.png
caleb
@caleb0
snow!
https://cloud-8zsy96yzs-hack-club-bot.vercel.app/0img_20220309_170756919.jpg
karolina
@karolina0
wow... it's been a while... in september of 2021, i got cut from my school's volleyball team. i had been playing club volleyball for several years. i was sad, angry, mad, but mostly confused, because i had identified with volleyball so much over the last few years. that same month, in an effort to join some sort of sport, i impulsively joined cross country. i met an amazing community of people that helped making running less bad. when i returned to track in the spring, i joined both long distance and pole vault (my usual event). inspired by xc, at my local civil air patrol squadron, i founded a run club community on strava that has now amassed nearly half of our cadets. we've hosted in-person runs, ran to mt. olympus (virtually), and recently... WE GOT STICKERS! our motto is 'stridin' on', and our logo is a little cold minecraft strider, since we're PNW kids and don't know what weather over 50 degrees means. being a varsity athlete in track and field after feeling like i wasn't good at sports anymore is rewarding, but founding a swag community with STICKERS is a million times better. anyway. i missed hack club.
https://cloud-gsf82wowj-hack-club-bot.vercel.app/0striderv2.png
caleb
@caleb0
Went for a snow hike and saw a bird.
https://cloud-8jybkj5nw-hack-club-bot.vercel.app/0pxl_20220212_175803430.jpghttps://cloud-1itlp4gqq-hack-club-bot.vercel.app/0pxl_20220212_153756531.jpg
clairebookworm
@clairebookworm0
snow!
https://cloud-aoyuecr5m-hack-club-bot.vercel.app/0image_from_ios.jpg